PackStar Mover Body Specifications
 
PackStar Deluxe
PackStar
BODY TYPE
Skirted aluminum mover van
Low mount with 5' reinforced attic
Non-skirted aluminum mover van
Low mount with 5' reinforced attic
FLOOR
Laminated Oak hardwood
1-1/8" shiplap, 2 screws per board
2 coats high gloss polyurethane
Laminated hardwood
1-1/8" shiplap, 2 screws per board
2 coats high gloss polyurethane
REAR FRAME
Mill finished stainless steel with "A" track slots cut into rear outside posts.
Galvanneal steel, reinforced/painted

All PackStar Mover Vans
Length
26' and 5' attic (reinforced)
Roof
Aluminum
Width
96" OD, 93" ID
Roof Bows
24" O.C. - anti-snag
Inside Height
109"/108" ID (nominal)
Roof Liner
3/8" non-sagging finished plywood
over bows
Overall Height
12', 10" - 12',11.5" (nominal)
Radius Front
.130 (1/8") extruded natural aluminum
Rear Door
(full width swing)
2 panel double open (92" x 102")
3/4" plymetal, 2 Eberhard cam locks
10 hinges
Corner Posts
5" radius - .130 (1/8") extruded natural aluminum
Curb Side Door with slotted header plate (centered)
2 panel double open
special plymetal
72"W x 102"H opening (nominal)
2 Eberhard cam locks
8 hinges, slotted header plate
Bumper
Binkley tubular steel bumper/slip resistant complying with Federal Regulation
Road Side Door with slotted plate (rear of axle)
single open
special plymetal
48"W x 102"H opening (nominal)
2 Eberhard cam locks
4 hinges, slotted header plate
Spot Light
1 upper right rear w/ cab switch
Crossills
3" steel "I" beams 16" O.C.
Marker Lights
Complying with Federal Regulation
Mainsills
(low mount)
1/2" x 3" flat bar
S/T/Tail Lights
Complying with Federal Regulation
Support Plate (internal wheelplans)
10 ga formed steel over tires
Mud Flaps
Anti sail
Undercoat
Fully undercoated
Paint Color Body
Pre-painted white panels with natural aluminum extrusions
Attic Floor
3/4" FRP-reinforced with aluminum crossills
Lettering/
Decal
Optional - including custom van line paint
Side Posts
24" O.C. double slotted, inc. side doors
Tailgate
Optional - 48" sliding pipe type tailgate with tail lights
Inside Finish
1/4" finished seamless/full height plywood between posts
Conspicuity Markings
Optional
Bulkheads
3/4" pre-finished plywood front wall & attic
Back to PackStar Information